iGET SECURITY EP28

iGET SECURITY EP28 - Wireless Bridge for Wired Sensors

A wireless bridge for wired sensors from other manufacturers for the iGET SECURITY M5 alarm system. It is used where a sensor from another manufacturer that communicates via a switch is installed and needs to be connected wirelessly to the iGET SECURITY M5 alarm system. This "bridge" or "converter" is universal and allows a large number of third-party sensors to be connected to the M5 alarm system, such as outdoor PIR sensors and infrared barriers. As soon as a connected sensor detects a status change, it sends this information to the EP28, which responds to the NO (normally open) contact input. The EP28 then transmits the signal to the iGET SECURITY M5 main panel via a wireless frequency. Tamper protection, 256-bit transmission encryption, very long battery life of up to 5 years, continuous monitoring of sensor activity, signal strength, and battery status. Easy pairing with the basic alarm set via QR code. Range from the main unit up to 1 km. Modern design and low power consumption.

Key features:

• The EP28 bridge is used where a wired sensor from another manufacturer is installed and needs to be wirelessly connected to the iGET SECURITY M5 alarm
• Used to convert the signal from a wired sensor (NO - normally open) into a wireless signal for the iGET SECURITY M5 alarm
• Easy expansion of the basic alarm set by scanning a QR code
• 256-bit encryption of wireless transmission
• Battery life up to 5 years depending on the number of detections
• Range from the main unit up to 1 km
• The iGET M5 alarm monitors sensor activity, signal strength, and battery percentage
• Includes an LED indicator
• lights up upon detection; when the battery is low, it flashes every 15 seconds and also serves as a test button

Specifications:

• Transmission frequency: 868.35 MHz
• Security: 256-bit
• Battery life: up to 5 years
• Operating temperature: -20°C to +50°C
• Operating humidity: 5% to 95%
• Power supply: 1x 3 V battery, type CR123A
• Operating current: up to 100 mA
• Standby current: 0.015 mA
• Contact closure: upon detection of a signal from the cable line
• Signal range to the central unit: up to 1 km with line of sight
• Sensor weight: 38 g including battery
• Dimensions: 84 x 26 x 22.5 mm

Descriptions and specifications are for informational purposes only and are subject to change without prior notice.