iGET SECURITY M4

Enjoy peace of mind wherever you are with the iGET SECURITY M4 smart security system. It’s wireless, communicates with your phone via Wi-Fi, and can send an SMS alert via GSM in the event of a Wi-Fi outage. And since it works with both Android and iOS, you can use it to monitor indoor and outdoor IP cameras, control 230V outlets, and more than 20 other types of accessories. It features a wide range of logical and special functions, and you can adjust its settings while you’re sunbathing on the beach.

Availability: Discontinued.

The iGET SECURITY M4
is ideal for securing all types of buildings—houses, apartments, cottages, offices, as well as garages, stores, warehouses, government offices, and more. It is a wireless alarm system that is easy to install and control, which not only secures your home but can also remotely or via a timer activate electrical appliances using controlled outlets, and you can monitor what’s happening at any time via IP cameras. In the event of an alarm, the system starts recording on the camera and immediately shares the video with the app on your mobile phone. All detectors are wireless, most are battery-powered, and the main unit is powered by a 230 V mains supply but also has its own backup battery with a runtime of up to 8 hours. Thanks to this, the property is constantly monitored even during a power outage.

App
An app is available for free on Google Play and the iOS App Store to control the system. Using this app, you can easily configure all settings, add detectors, control IP cameras, smart outlets, and more. The app is available in Czech, Slovak, English, Polish, Hungarian, and many other languages. A single app thus combines the configuration and control of the alarm, IP cameras, and smart outlets—all-in-one.

Wireless Transmission
No wiring or complicated setup is required to connect detectors to the central unit. The detectors are wireless and most are battery-powered. Adding additional detectors takes just a few minutes. The central unit includes a SIM card slot, which it uses to send alarm notifications.
Wireless detectors have a range of up to 80 m, and some even reach 200 m. Simply insert the batteries, plug it in, and place the detector in the room. Activating and deactivating the alarm is also quick and easy, using either a wireless key fob, wireless keypad, RFID chip, or mobile app. Durable key fobs serve as remote controls for the alarm. You can activate/deactivate the alarm, trigger an alarm, and enable the special Home mode for specific zones only.

How the alarm communicates with the app/phone
The iGET SECURITY M4 alarm is connected to the Internet. It communicates automatically with the server. An Internet connection for the M4 is required and can be established via a Wi-Fi connection (the alarm supports Wi-Fi 802.11 b/g/n at 150 Mbps) or via an Ethernet cable with an RJ45 connector (10/100 Mbps). The user’s mobile phone must be connected to the Internet anywhere in the world via a data connection or Wi-Fi. The alarm thus communicates with the mobile phone via data. The alarm cannot be connected to the Internet via data transmission over a SIM card. The GSM connection with a SIM card serves as an additional/backup option for the alarm to contact the user—by sending an SMS alert. Wireless IP cameras are directly connected to your home Wi-Fi network with an Internet connection, just like the M4 alarm.

Multiple User Accounts
The iGET SECURITY M4 alarm system includes 3 levels of user accounts. The highest is “Administrator,” who performs all settings and controls. Next is “User”—this user can control the alarm but cannot make settings (arm/disarm/home mode/SOS, view live video from cameras, control outlets, etc.). The final level is “Guest,” who can only control these modes: arm/disarm/home mode/SOS.

Quickly sharing settings and creating an account
If the administrator wants to add another user, it’s very easy. Simply install the “iGET M4” app on another mobile phone. Then display the QR code for sharing on the first phone and scan it using the app on the second phone. Pairing is now complete.

Extensive portfolio of additional accessories and wireless transmission
No wiring or complicated setup is required to connect detectors to the central unit. The detectors are wireless and most are battery-powered. Adding additional detectors takes just a few minutes. Wireless detectors have a range of up to 80 m, and select models even reach 200 m. Simply insert the batteries, plug in the detector, and place it in the room. All accessories compatible with the iGET SECURITY M4 alarm are labeled iGET SECURITY M3Px (where "x" is the accessory number from 1 to 99).

Control of 230V
Power Outlets The iGET SECURITY M4 alarm system offers not only security but also smart home control. Using remotely controlled sockets to manage a single 230V appliance, you can control lighting, heating, air conditioning, and more. The socket is plugged into a standard wall outlet, with the appliance connected to it. You can turn it on/off remotely, set a timer, or link it to a specific function.

IP Cameras
The iGET SECURITY M4 alarm system can also be expanded with wireless Full HD IP cameras: the iGET SECURITY M3P15v2 (indoor pan-tilt) and M3P18v2 (outdoor fixed), as well as the HD M3P20v2 (indoor fixed). You can always connect to these cameras via online data transmission. The cameras connect to the wireless network via Wi-Fi.

Option to name zones/detectors/controllers
The iGET SECURITY M4 allows for full naming of zones, detectors, and all accessories. Up to 160 characters can be entered. This is more convenient and clearer than simply selecting from a preset list of room names.

Tamper protection, power
disconnection As soon as the alarm detects a signal attempting to jam the frequency band on which the wireless detectors communicate, it immediately triggers an alarm. If the alarm’s 230 V main power supply is disconnected or reconnected, the user is immediately notified via the app. The alarm’s backup battery lasts up to 8 hours.

Low battery in the detector
If a detector has a low battery, a yellow/red LED will light up on that detector. However, the user of the iGET SECURITY M4 alarm does not need to check this. The detector sends information about the low battery to the iGET SECURITY M4 alarm, which notifies the user via the app.

Key features:

For more tips and tricks regarding the iGET SECURITY M4 alarm, visit the Support page.

Other files:

Descriptions, images, and specifications are for informational purposes only and are subject to change without prior notice.