iGET SECURITY P11 - venkovní siréna

iGET SECURITY P11 - Outdoor Siren

Sale ended
Accessories for the M3B

Accessories for the iGET SECURITY M3B and M2B security system – P11 outdoor siren.

Availability: Discontinued, replaced by P11v2

NOTICE:
The iGET P11 Outdoor Siren is not compatible with the iGET SECURITY M2B alarm version with serial numbers M2B2013xxxxxxxx, but it is compatible with all other versions. For more information, please contact us at sales[@]iget[.]eu. Please note: additional information is provided in the "Warnings/Limitations" section below!

P11
Outdoor Siren This is an outdoor siren designed for installation on a house, garage, cottage, etc. It is intended for use with the iGET SECURITY M3B and M2B alarms. This siren is not compatible with alarms from other brands!

Key specifications:

- The outdoor siren is designed for all locations where it is appropriate to trigger an outdoor alarm
as well—during an alarm, it emits an emergency tone with a volume of 110 dB, at the same time, bright red LEDs on the device
light up- it also features a rear tamper switch, meaning that if the siren is accidentally removed, it will trigger an
alarm- the siren is continuously powered by a power adapter with an input voltage of 230 V AC, however, it also includes a self-charging battery, meaning that if the power supply is disconnected, the siren remains active
—a simple addition to the basic alarm set—
battery life up to 1 year depending on the number of detections

Note/Limitation:

The siren responds immediately, without delay. It cannot be used with a delayed alarm setting.
When using this siren, the alarm must be controlled via key fobs, meaning activation/deactivation occurs immediately.
Therefore, it cannot be used with a delayed detection zone, as the alarm is triggered immediately, not after the countdown for code entry has ended.

Specifications:
Transmission frequency: 433 MHz
Operating temperature: -20°C ~ +50°C
Operating humidity: 5% ~ 95%
Encoding used: 2262/1527
Power supply: power adapter, input: 230 V AC, output: 12 V DC 0.5 A
Signal range to the central unit: up to 80 m with direct line of sight

Battery life: up to 9 months depending on the number of activations
 

Other files:

Descriptions and specifications are for informational purposes only and are subject to change without prior notice.