iGET SECURITY P11v2 - venkovní siréna

iGET SECURITY P11v2 - Outdoor Siren

Accessories for the M3B
Now on sale

Accessories for the iGET SECURITY M3B and M2B security system – P11v2 outdoor siren.

 

iGET SECURITY P11v2 - venkovní siréna gallery 1

P11v2

Outdoor Wireless Siren Outdoor wireless siren for the iGET SECURITY M3B and M2B alarm systems. The siren is powered by a power adapter or batteries. Weather-resistant. It can be connected to the alarm system wirelessly or via cables.

Key specifications:

  • The outdoor siren is designed for use in all locations where an outdoor alarm is appropriate
  • During an alarm, it emits a 100 dB emergency tone, and bright red LEDs on the device also illuminate
  • It features a tamper switch (security button) on the back; if the siren is removed unintentionally, it triggers an alarm
  • The siren is powered by a mains adapter with specifications of 230V AC/12V DC 0.5A (included in the package), or it can be powered by 4 LR20 batteries
  • Simple expansion of the basic alarm set

Note:

The siren responds immediately, without delay. It cannot be used with a delayed alarm setting.

When using this siren, the alarm must be controlled via key fobs, meaning activation/deactivation occurs immediately.

Therefore, it cannot be used with a delayed detection zone, as the alarm is triggered immediately, not after the countdown for entering the code has ended.

Specifications:

Transmission frequency: 433 MHz
Operating temperature: -20°C ~ +50°C
Operating humidity: 5% ~ 95%
Encoding used: 2262/1527
Power supply: power adapter or batteries
Power supply via the included adapter: input: 230V AC, output: 12V DC 0.5 A
Power supply using batteries not included in the package: 4 x 1.5V LR20
The siren can be connected to the alarm wirelessly or via a wired
connection Signal range to the central unit: up to 80 m with direct line of sight


Descriptions and specifications are for informational purposes only and are subject to change without prior notice.