iGET SECURITY P1v2 - PIR motion detector

Wireless PIR motion detector for iGET SECURITY M3B and M2B alarm systems. This PIR detector is also compatible with many alarm systems from other brands; please contact our technical support for compatibility information.

Key Specifications

• The detector is designed for use in any room where motion detection is required
• Simple expansion of the basic alarm kit
• Motion detection based on infrared radiation
• Includes an LED indicator—flashing indicates motion detection, steady light indicates low battery
• Battery life up to 2 years depending on the number of detections
• Two timer options: in "T" (Standard) mode, detection occurs, followed by a 60-second wait; then another alarm can be triggered. In "S" (Smart) mode, it counts 60 seconds from the last detection; for example, if detection occurs at the 31st second, it starts counting from the beginning. "S" mode has lower power consumption.
• When mounted at a height of 2 m, the coverage angles are: horizontal 90°, vertical 60°, coverage up to 7 m

Specifications

:- Transmission frequency: 433 MHz-
Operating temperature: -20°C ~
+55°C- Encoding used:
1527/2262- Operating humidity: < 75%
- Power supply: 2 AAA batteries, type
R03- Security coverage: up to 7 m-
Signal range to the central unit: up to 70 m with direct line of
sight- Battery life: up to 2 years depending on the number of
activations- Recommended mounting height: 1.7 ~ 2.2 m-
Countdown time setting from last detection: 8 sec. or 50 sec
.- Dimensions: 94 x 54 x 41 mm (without wall mount)

Descriptions and specifications are for informational purposes only and are subject to change without prior notice.