iGET SECURITY EP14

iGET SECURITY EP14

Accessories for the M5
Now on sale

 Wireless smoke sensor for the iGET SECURITY M5 alarm system.

 

iGET SECURITY EP14 gallery 1
iGET SECURITY EP14 gallery 2
iGET SECURITY EP14 gallery 3

iGET SECURITY EP14 - Wireless Smoke

Detector Wireless smoke detector for the iGET SECURITY M5 alarm system. It can be used as a standalone device or as an accessory for the iGET SECURITY M5 alarm system. Complies with the provisions of EN 14604:2005. Optical smoke detection, discreet design. Tamper protection, highest-level 256-bit transmission security, long battery life of up to 3 years; the alarm system continuously monitors the sensor’s activity, signal strength, battery level, and more.

Smoke sensors/detectors are now an integral part of homes, cottages, apartments, garages, etc. The iGET SECURITY EP14 can be used as a standalone device or as an accessory for an alarm system. Smoke is detected by the scattering of optical beams within the sensor chamber, triggering an audible and visual alarm, and the EP14 notifies the main alarm unit. Easy pairing with the basic alarm set via a QR code. Placement distance from the main unit up to 500 m. For indoor use.

Main parameters:

  • The sensor/detector is designed to detect smoldering fires; upon detection of a smoldering fire, visual and audible alarms are activated. When connected to the central alarm unit, this unit will also notify via the app or SMS about the alarm.
  • The EP14 sensor operates on the principle of scattered light and is highly sensitive to larger particles contained in smoke.
  • It is designed for all rooms where fire protection is required.
  • You can check whether the sensor is fully functional using the built-in test button,
  • It is primarily intended for use in houses, cottages, and apartments,
  • It is not intended for motorhomes, mobile homes, or industrial environments,
  • Easy expansion of the basic alarm set—simply scan the QR code on the sensor,
  • Highest level of wireless transmission encryption: 256-bit,
  • battery life up to 3 years,
  • sensor range from the main unit up to 500 m,
  • The iGET M5 alarm constantly checks whether this sensor is available, as well as the signal strength and battery level in the sensor.

Specifications:

Transmission frequency: 868.35 MHz
Security: 256-bit
Battery life: up to 3 years
Operating temperature: 0°C ~ +50°C
Operating humidity: 10% ~ 90%
Power supply: 1x 9 V battery, type 6F22/6LR61
Smoke sensitivity: 0.086 dB/m to 0.14 dB/m
Certification: BS EN 14604: 2005
Internal siren volume: 85 dB at 30 cm
Operating current: up to 100 mA
Standby current: 0.02 mA
Signal range to the central unit: up to 500 m with line-of-sight
Sensor weight: 145 g including battery
Sensor dimensions (length x width x depth): diameter 107 mm, depth 33 mm

Descriptions and specifications are for informational purposes only and are subject to change without prior notice.